| Generic
Custom Drive Shafts That Can Be Easily Adapted
To Any Vehicle
Performer 45 Drive Shaft
Bad Boy Jr 60 Drive
Shafts
Bad Boy 80 Drive Shaft
Slip With/CV Drive Shaft
ie.. these are non-vehicle specific drive shafts.
They can be adapted to any vehicle.
|
PERFORMER 45 Degrees 2 Ton Daily Driver Drive Shaft
Comes with Your Choice of Flange U-joint At The Axle
TWO CV HIGHWAY SPEEDS PERFORMER DRIVE SHAFT AND SIZE |
Bad Boy Jr 60 Degrees 2 Ton Off Road For Any Vehicle.
Your Choice Of Flange and Axle u-joint.
TWO CV OFF ROAD DRIVE SHAFT ANY SIZE CV |
Bad Boy 80 degrees for Any Vehicle Your Choice of
Flange and Axle u-joint,
+*
TWO CV DRIVE SHAFT ANY SIZE CV |
Slip with CV Drive
Shaft For Blazers, Jeeps, etc... For any Vehicle With Your Choice of Slip
Yoke. To Remove Vibrations or Make a Large Angle.
SLIP WITH TWO CV HIGHWAY
SPEEDS PERFORMER DRIVE SHAFT ANY
SIZE |
CUSTOM
DRIVE SHAFTS
Staked-in U-joint Drive
Cherokee
Conversion Front Drive Shafts
Low
Rider Drive Shafts
GKN CVs
Style (pancake style)
The list is too long to publish so
please call us. |
 
Low Rider Drive Shafts With Slip Yokes on the second
piece. Also available one piece telescopics. |
 
FRONT
CHEROKEE AND OTHER VEHICLES FRONT
Conversions Pan Cake CVs to U-Joints CV
for higher reliability.
|
STAKED IN U-JOINT DRIVE SHAFT. WE MAKE THEM KEEPERS
WITH SERVICEABLE U-JONTS. |
Fronts for Jeep Grand Cherokee, Astro's,
Dakota's, and Many Others. Call us.
|
| Custom
Drive Shafts
Suzuki Drive Shafts
Buggy Axles for 930 Hubs
Land Rover Drive shafts
Land Cruiser Drive Shafts
|
Custom Suzuki Front /Rear Drive Shafts
|
Custom Land Rover Drive Shafts
|
Custom Buggy
axles For 930 Hubs |
Custom Landcruiser Drive Shafts
|
| Custom
Drive Shafts
Chevy Drive Shafts
Ford Drive Shafts
Dodge Drive Shafts
Toyota DriveShafts
|
Custom Chevy Drive Shafts Front and Rear SYEs For Any
slip yoke. Slip With CV Drive Shafts etc...
|
FORD SUPER-DUTY FRONT HIGH ANGLE
lifted super Duty Rear With CV After CarrierCustom
Ford Drive Shafts Front and Rear
|
Custom Dodge Drive Shafts. Front and Rear.
Alternatives without using the Generic Custom Drive
Shafts |
40 degrees Long Travel Front
Spicer Type Two Piece Tacoma AND Tundra
Custom Toyotas
Pick-ups, Fore runners,
Tacoma, Tundra, T100 |
| CUSTOM
DRIVE SHAFTS
JK jeep 2007 up U-joint
DS
Jeep CJ Drive Shafts
Jeep YJ,
TJ, XJ Drive Shafts
Jeep Rubicon Drive
Shafts
|
Custom JK Jeep Drive Shafts
Replace the original TOP DS with DS
on the bottom. A heavy duty one ton 1350 drive shaft kit comes with
supporting pieces shown.
|
Custom Jeep CJ Front and Rear Drive Shaft Kits For
Double Cardan CVs or |
Custom Yj, TJ, XJ Drive Shafts Front And Rear.
External TC SYEs |
CUSTOM JEEP RUBICON 1350 HIGH ANGLE 35 DEGREES
REAR |
STOCK DRIVE
SHAFTS
Chevy drive shafts
Ford Drive Shafts
Dodge Drive Shafts
Toyota P/U Drive Shafts
|
Stock Chevy Drive Shafts |
Stock Ford Drive Shafts for Broncos, Bronco IIs,
Super Dutys, Excursions, etc |
Stock Dodge Drive Shafts |
STOCK Toyota
Pick-ups, Fore runners,
Tacoma, Tundra, T100, Land Cruisers
|
| STOCK
DRIVE SHAFTS
Jeep YJ,
TJ, XJ
Jeep CJ
Jeep JK 2007 up
Land Rover
|
Stock Jeep Wrangler YJ, TJ, XJ Cherokee
|
Stock Jeep CJ Drive shafts Front and Rear |
STOCK JK Jeep Drive Shafts
Replace the original front or rear with heavy duty
one ton 1350 drive shaft and supporting pieces
|
Stock Land-rover Drive shafts
|
SLIP YOKE
ELIMINAT0R KITS (SYEs) INTERNAL / EXTERNAL
SYE
Internal/Externsl KITS
SYE Yokes
|
KIT --INTERNAL To Transfer Case
231j,231c,241c. Must install inside TC per instructions. |
KIT --EXTERNAL to transfer case SYEs For Jeeps,
Trucks, Blazers, or any vehicle with a slip yoke. Without tearing the
Transfer Case apart to install. |
 
SYE YOKES/FLANGES
Slip Yoke
Eliminators (SYE) Flanges and Yokes Only no drive shaft.
|
|
|
Double Cardan CVs
CV HEADS
CV Parts
ALL CV heads we offer can be sold by themselves
instead of a whole drive shaft. |
1310, 1330, 135O, BBJR60, BB 80, PERFORMER 45 |
BB-80 BBjr-60
PERfORMER 45 1-t35 .5-t40
DOUBLE CARDAN cv
PARTS From 26 To 80 degrees, From 1/2 ton to 2 ton rating, from 1600
ft-lbs to 3000 ft-lbs strength. |
|
|
STOCK
AND CUSTOM PARTS
Yokes
Flanges
Long Splines
Yoke Seals
Custom Yoke that exceed Factory Specs with respect to
Strength and angle |
 
Deep Throat Ubolt 1350 for
Dana 300-26spline, D20-10 spline,NP 205 front 10 spline, Np 205 front 30
spline, NP203s-32spline, NP205s-32 spline, Atlas-32-spline, All
Short Shaft SYEs-32 spline and any other spline you want.
|
 
Universal
flanges or Dana 300-26spline, D20-10 spline,
NP203s-32spline, NP205s-32 spline, Atlas-32-spline, All Short Shaft
SYEs-32 spline and 14 Bolt or any other Differential. |
 
LONG TRAVEL AND STOCK SLIP YOKES AND STUBS Spline FOR
DRIVE SHAFTS
|
 
Transmission Slip
yokes, u-joint
and CV style all 31 and 32 spline yokes. These yokes can be made to part
of a Double Cardan CV like theSlip with CV drive shaft uses one for
Blazers.
|
STOCK
AND CUSTOM PARTS
End Yokes For
Differentials/Transfer cases
Foreign Carrier Bearings
Domestic Carrier
Bearings
|
 
Transfer case and
Differential End Yokes. We can make you any yoke for any spline.
Guaranteed welds to hold.
|
Foreign Car and
truck |
Domestic Car and
Truck Carrier Bearings
|
|
|
STOCK AND CUSTOM PARTS
Tube Weld Yokes
Increasing Bushings
Drive Shaft Tubing
Custom Yoke that Meet or exceed Factory Spec
|
 
WELD YOKES AND SEALS |
Tube too Big/ Shim The Yoke To size. |
Tubing |
|
| U-JOINTS
Conversion U-joints
Offset U-joints
Staked U-joint Replacemts
Domestic Car And Truck
UJ
Custom Yoke that Meet or exceed Factory Specs |
Conversion
U-joints
|
Staked in U-joints to make
non-serviceable DS serviceable
|
Common U-joints American
Vehicles
|
|
