World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
Slip Yokes, Splines, Spline Stubs, Spline Shafting
MAKE YOUR OWN KIND OF THING
EXTENDABLE DRIVE SHAFT YOKES
Y2k100 The longest 1310/1350 yoke in the market 1.5 inches diameter 16 splines. Below they are compared to the market’s longest.
Use this long yoke to give 7 inches of travel instead of the 3-4 inches you get from a stock drive shaft. The yoke exists as a 1310 and now also as a 1350. The 1350 yoke is forged while the 1310 is not. If you upgrade your differential to a 1350 yoke and u-joint (which is what most customers are doing) you can install our newer and stronger forged yoke.
Y2K100 / Y2K200 COMBO Long Yoke and long spline 10.5 inches- 1310 -- $150.00 Y2K100 Long Yoke 10.5 inches- 1310 -- $85.00 Y2K100-5 forged 1350 long Yoke 10.5 inches -- $85.00 LONG SPLINED STUB to support the long yoke Very Tough Spline !
This stub allows 7” of working travel with 9.25 inches of total spline with the Y2K100 yokes as compared to the 3-4 inches maximum in the industry. This stub is 10.5” long. If you need a different tube size let us know and we will machine for free.
NEW PRICE
Y2K200 long stub for 3" 83 wall tube fits Y2K100-- $85.00 _____________________________________________________________________________________________
Y2K400 – A 30 Inch long bar
with 25 good inches of 10 spline + holding shaft space 1 5/8 inches diameter. This spline is supported with a 10 spline female collar 6 inches long and fits a 2.25 diameter tube 125 thousands wall thickness. The tube can be purchase with the collar. Guaranteed not to twist !!
Y2K400 10 spline shaft -- $185.00
Y2K400 10 spline collar -- $50.00
Two types of seals
One push on for 1.375 diameter spline and the other screws on (with cork type seal) for 1.5 inch diameter spline
Seal for 1.375 push-on -- $5.50 Seal for 1.375 inch screw-on -- $10.50 Seal for 1.5 inch screw-on -- $10.50
Slip & Stub 1/2 ton 1310 u-joint ton -- $60.00 FITS 2.5" 83
Slip & Stub 1330 3/4 ton u-joint 16 spline fits 2.5 inch 83 wall tube -- $60.00
1350 Slip and Stub 1 ton 16 spline fits 3.5 inch 83 wall tube -- $85.00
1410 Slip and Stub 1 ton 16 spline fits 3.5 inch tube -- 105.00
This is the CV that goes first on the front drive shaft. We have the front part only rebuilt like new. Loosen center nut and tap yours out.
You may have to balance. We make rear short shaft kits with CVs to eliminate vibrations.
$175 grand Cherokee front pancake CV
Drive Shaft Slip Yokes
1310, 1330, 1350 OR 1410 SLIP YOKES
! Note:
1310 = half ton
1330 = three quarter ton
1350 = one ton
1410 = one and a half ton
NEW PRICES
1310 long slip yoke for 1 3/8 diameter spline 8 1/4" -- $45.00 1310 short slip yoke for 1 3/8 diameter spline 6 1/2"-- $45.00 1330 long slip yoke for 1 3/8 diameter spline 8" -- $45.00 1350 long 4" working travel slip yoke for 1. 5 diameter spline 5 1/4"-- $55.00 1410 long slip yoke for 1.5 diameter spline 8 1/4"-- $60.00
Mid-ship spline fits 3.5 inch tube used with 16 SPLINE 1.5 inch diameter spline 1410 two piece -- $95.00
SPLINED STUBS 8.125” tip-tip 1.5" diameter spline
! Note:
1310 = half ton
1330 = three quarter ton
1350 = one ton
1410 = one and a half ton
For 1310 long STUB SPLINE -- $45.00 (Tube 2.5 inch 83 wall 1-3/8" diameter) For 1310 short STUB SPLINE -- $45.00 ( Tube 2.5 inch 83 wall 1-3/8" diameter) For 1330 long STUB SPLINE -- $45.00 (Tube 3.5 inch 1-3/8" diameter) For 1350 long STUB SPLINE -- $ 55.00 (Tube 3.5 inch 83 wall 1-1/2 inch diameter) For 1410 long STUB SPLINE -- $65.00 (Tube 3.5 inch 83 wall 1-1/2 inch diameter)
