World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
LATE MODEL S1O FRONT DRIVE SHAFT KIT AND REAR DRIVE SHAFT STOCK
(if you don't see them here don't panic, call us, we have them!)
LATE MODEL S10 CHEVY FRONT REPLACEMENT KIT.
This yoke is made using your splines from the existing shaft so don't throw them away and put it in a box and send to us with your name. We will match the order that you make here online. The drive shaft will be high angle if the lift is greater than 5" and will cost $50 additional. The yoke is bolted down to the output shaft after drilling and tapping a hole at the end of the output shaft. We have instructions.
$425 For a Real Drive 4x4 setup.
S10 Late Model Two-Piece Drive Shaft
with Two Saginaw CVs on the Rear Piece $390.00
S10 Late Model Two-Piece Drive Shaft without CVs on the rear piece. So imagine the second piece with CVs in the picture above. We have found that the CVs create vibrations and/or fail. So for five years we have sold drive shafts without the CVs and have had 100% success in removing the vibrations and its less expensive. There are two lengths, have measurement from weld to weld on both tubes.
on the Rear Piece -- $275.00
NOTE: trouble with the rear drive shaft vibrating and can't get rid of it even when you balance it? Give us a buzz.
