RUBICON JEEP DRIVE SHAFTS

THE BEST DRIVE SHAFT OFFERED ANYWHERE                                           

_{WE DO NOT USE ADAPTERS WITH ANYTHING, THE DRIVE  SHAFT CV FLANGE  FITS RIGHT ON YOURS, IF YOU LIKE FLANGES. OTHERWISE, IF YOU LIKE CV STYLE YOKES (RIGHT PICTURE)}

Available in three quarter ton and one ton CVs, angles up to 35 Degrees maximum. The 1350 one ton with high angle option is recommended for 5 inch lifts and higher up to 8 inches. 

Note,  "tummy tucks" count as suspension lift.

We do not use 1310 half ton drive shaft because they are week at higher angles.

_________________________________________________________________________________________________________

  Three Quarter Ton CV Drive Shaft With Standard Splines 

with 1330 or diff. pinion u-joint

  FLANGE STYLE Only $265

 FLANGE STYLE WITH LONG SPLINES $340

Our flanges fit yours - No adapterS

_________________________________________________________________________________________________________

  One Ton CV HIGH ANGLE Drive Shaft With Standard Splines. 

Has 1330 at the differential pinion u-joint.   

  FLANGE STYLE HIGH ANGLE 35 DEGREES MAX. STOCK SPLINES $350

FLANGE STYLE HIGH ANGLE WITH w/long splines $395

_________________________________________________________________________________________________________________________________________________________________________________________

ALL PROFESSIONALLY BUILT. YOU WILL LIKE HOW IT LOOKS AND WORKS !