Blazer Rear

THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.



SYE Kits                    LONG TRAVEL       ROVER, SUZUKI, TOY    BLAZERs + JEEPS+OTHERS    PERF 45    BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES



Blazers 1350         1350 32 spline     Universal 32 SPL Suzuki          HD Buggy Axles 930 hubs

CV 32 SPL 208TC 205,Atlas,All Kits Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

SHOPPING CART SPECIALS

                                A) NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B) Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft Online.

                         D) 930 Buggy axles Can not be beat !!!

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

Ford-Chevy-Dodge-Jeep-Blazer SYEs / Chevy S10 Front / S10 Stock rear / S10 231 SYE

Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes / Custom Flanges

Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS

2417 WEST Lincoln St Phoenix AZ 85009

RUBICON JEEP DRIVE SHAFTS

THE BEST DRIVE SHAFT OFFERED ANYWHERE

1350 OR 1330 CV STYLE YOKE FOR RUBICON.

REMOVE THE FLANGE AND THE DAMPER AND INSTALL A LONGER HEAVY DUTY ONE TON CV STYLE YOKE FOR ONE HECK OF A STRONG ONE TON DRIVE AND SHAFT LESS BULKY AND COSTLY PARTS..

THIS SETUP KEEP THE ORIGINAL OUTPUT RUBICON FLANGE WHICH IS RECOMMENDED BY THE OEM

WITH THIS SETUP YOU CAN REMOVE THE FLANGE AND DAMPER : 1350 CV STYLE WITH NO FLANGE.

_{WE DO NOT USE ADAPTERS WITH ANYTHING, THE DRIVE SHAFT CV
FLANGE FITS RIGHT ON YOURS, IF YOU LIKE FLANGES. OTHERWISE, IF YOU LIKE CV STYLE YOKES
(RIGHT PICTURE)}

Available in three quarter ton and one ton CVs, angles up to 35 Degrees maximum. The 1350 one ton with high angle option is recommended for 5 inch lifts and higher up to 8 inches. Note, "tummy tucks" count as suspension lift.

_________________________________________________________________________________________________________

Three Quarter Ton CV Drive Shaft With Standard Splines with 1330 or diff. pinion u-joint

FLANGE STYLE Only $295

YOKE STYLE Only $295

_________________________________________________________________________________________________________

One Ton CV Drive Shaft With Standard Splines (for lifts up to 8" with a high angle option of 35 degrees). Has 1330 at the differential pinion u-joint.

FLANGE STYLE Only $350

1350 YOKE STYLE Only $350

_________________________________________________________________________________________________________

OPTIONS: HIGH ANGLE AND LONG SPLINES OPTIONS

____________________________________________________________________

High Angle 35 DEGREES Option on 1-TON or 3/4 ton $50.

__________________________________________________________________________________

Three Quarter Ton Or One Ton CV Drive Shaft With Long Travel OPTION 9" of spline.

Only $75

__________________________________________________________________________________

ALL PROFESSIONALLY BUILT. YOU WILL LIKE HOW IT LOOKS AND WORKS !

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE