DRIVESHAFTSUPERSTORE

World Class Driveshafts

SALES and TECH HELP
800-845-6326 602-253-8006 

Customer Service for order status and repairs 888-222-8610

602-253-8208

FAX

602-252-5638

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

 

 

 

 

Catalogue

Customer Service

Contact Us

About Us

4x4 Links

4x4 Gallery

4x4 Videos

4x4 Babes

 

World Class Driveshafts

SALES and TECH HELP
800-845-6326 602-253-8006 

Customer Service for order status and repairs 888-222-8610

602-253-8208

FAX

602-252-5638

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

Eliminator Yokes And Flanges Only

Click Here  for Eliminator Yoke with drive shaft


The fixed yoke provided eliminates your slip yoke. The purpose being to allow the installation of a CV which lowers the angle thus removing vibration due to the lift. Other advantages of these yokes are the addition of working travel to a telescopic drive shaft and if the drive shaft fails, you can drive home on the front without spilling the transfer case or transmission fluid.

IF YOU WANT A SHORT SHAFT KIT WITH DRIVE SHAFT, SEE SHORT SHAFT KITS  SECTION

IF YOU DON'T FIND IT HERE CALL US AND MAKE A ORDER FOR WHAT YOU DO HAVE. WE MAKE THEM ALL.

 

 
 We make Eliminator Yokes and for ALL transfer cases. If you have a slip yoke we can eliminate it!!!

Slip Yoke Eliminator for FORD
Borg Warner 1356 transfer case slip yoke eliminator. Bolt after drilling and tapping a hole at the of the output shaft. The flange front 31 spline flange.

:

Ford Flange style 2 inch pilot 31 spline SYE for Ford -- $185.00
Ford Fange style  2.688 inch pilot 31 spline SYE for Ford  -- $185.00

 


Slip Yoke Eliminator (SYE) Yoke
for the np241, np205, and np208 slip yoke type transfer cases

   This is a fully splined 1 7/8 inch seal surface diameter slip yoke only. You can bolt this one on after drilling and tapping a hole at the end of the output shaft.

   Any slip yoke transfer case can have an SYE made for it. This includes Dodges, Fords, Chevys,.. As long as it is a slip yoke, it can be eliminated.

   Size of CV needed on the SYE Yoke

  FOR 208 SYE COMPLETE KIT CLICK HERE
This flange is 32 spline and is installed just like the yoke. This is a universal flange that has Ford(3" square hole pattern-treaded), Chevy (3" square hole pattern-no tread), Toyota( 2 3/8 square by 2 11/16 CV hole pattern, and the large hole pattern for Suzuki.   
 

Large universal flange style 2.0 pilot SYE -- $185.00
Large universal flange style 2.688 pilot SYE -- $185.00

 


Wrangler 27 spline slip yoke eliminator CV style or U-joint style
Yoke only

  These slip yoke eliminator Yokes are made custom and fit jeep 207, 242, 231 transfer cases and turbo 350 transmissions (for low rider fixed yokes when using our long slip shafts).

   This flange is 27 spline and is installed just like the yoke except that the purpose of a flange is to support the use of a one ton (1350) CV or a Saginaw (GM) CV like from a front of a 77 and up Chevy pick-up or Blazer.

    For front or rear outputs.

1310 u-joint style Wrangler 27 spline eliminator -- $165.00
1310 CV style yoke Wrangler 27 spline SYE -- $99.00
Ford style flange 2" pilot 3" cc holes Wrangler  27 spline SYE -- $165.00
 
Dana 300 26 spline flange output   -- $165
Dana 20   10 spline flange output  -- $165

NOTE: FOR Available for many other Transfer and Differential outputs. Give us a call

 

 

 

ANY UJOINT OF OURS BREAKS IN TWO WE REPLACE IT FREE OF CHARGE