THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS
 

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

 

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.

                

 SYE  Kits                    LONG TRAVEL        ROVER, SUZUKI, TOY     BLAZERs + JEEPS+OTHERS    PERF 45     BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES

                         

Blazers 1350         1350 32 spline     Universal  32 SPL Suzuki          HD Buggy Axles 930 hubs         

CV 32 SPL 208TC  205,Atlas,All Kits   Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

 

 

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

 

 

SHOPPING CART SPECIALS

                                 A)  NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B)  Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft  Online.

                         D)  930 Buggy axles  Can not be beat !!!

 

 

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

 

 

 

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

  Ford-Chevy-Dodge-Jeep-Blazer SYEs  / Chevy S10 Front / S10 Stock rear / S10 231 SYE

 Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

 Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes /  Custom Flanges

 Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Catalogue

Customer Service

Contact Us

About Us

4x4 Links

4x4 Gallery

4x4 Videos

4x4 Babes

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

CV Parts (double Cardan type)

Standard 1310, 1330, 1350 "H" Yoke for Automotive CVs Standard Angle 1310 standard angle H yoke -- $35.00 1330 standard angle H yoke -- $40.00 1350 standard angle H yoke -- $50.00 High Angle 1310 high angle H yoke -- $45.00 1330 high angle H yoke -- $55.00 1350 high angle H yoke-- $65.00   1310, 1330, 1350 ball stud yoke Standard Angle 1310 standard ball stud yoke -- $35.00 1330 standard ball stud yoke -- $45.00 1350 standard ball stud yoke -- $55.00   High Angle 1310 high angle ball stud yoke -- $45.00 1330 high angle ball stud yoke -- $55.00 1350 high angle ball stud yoke -- $75.00   1330, 1350 CV flange Standard Angle 1310 standard CV flange -- $55.00 1330 standard CV flange -- $65.00 1350 standard CV flange -- $95 High Angle 1310 high angle CV flange -- $65.00 1330 high angle CV flange --$75.00 1350 high angle CV flange -- $125.00   1310 Bronco II CV Flange 1310 standard angle Bronco II CV -- $55.00 1310 high angle Bronco II CV -- $65.00   Saginaw 77-up Front GM CV flange Conversion to spicer type which uses 1310 u-joints to implement the CV  and flex 8 degree more Standard angle Saginaw flange -- $65.00 High angle Saginaw flange -- $75.00 Saginaw to Spicer high angle Conversion flange 1310 -- $95.00     Toyota Conversion Flanges bolts up to any Toyota CV flange and converts to 1310 spicer series CV which are more available and less expensive Standard angle Toyota to spicer type conversion flange 1310 -- $85.00 High angle Toyota to spicer type conversion flange 1310 -- $95.00   Standard 1310, 1330, 1350 CV Centering Link 1310 half-ton centering link -- $35.00 1330 3/4 ton centering link -- $40.00 1350 one-ton centering link -- $55.00   Toyota CV Flanges Standard or high angle for building a high angle CV High angle CV flexes to 35 degrees maximum.   Standard angle Toyota CV flange -- $55.00 High angle Toyota CV flange -- $65.00   Toyota CV "H" yoke For standard angle or high angle for building a high angle CV High angle CV flexes to 35 degrees maximum Toyota standard angle H yoke -- $45.00 Toyota high angle H yoke -- $65.00   Toyota CV ball stud weld yoke For standard angle or high angle for building a high angle CV High angle CV flexes to 35 degrees maximum Toyota standard angle ball housing yoke -- $65.00 Toyota high angle ball stud yoke -- $115.00

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE