DRIVESHAFTSUPERSTORE

World Class Driveshafts

SALES and TECH HELP
800-845-6326 602-253-8006 

Customer Service for order status and repairs 888-222-8610

602-253-8208

FAX

602-252-5638

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

 

 

 

 

Catalogue

Customer Service

Contact Us

About Us

4x4 Links

4x4 Gallery

4x4 Videos

4x4 Babes

 

World Class Driveshafts

SALES and TECH HELP
800-845-6326 602-253-8006 

Customer Service for order status and repairs 888-222-8610

602-253-8208

FAX

602-252-5638

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

Slip Yoke Eliminator (SYE) Kits

These are kits that eliminate your slip yoke.  The purpose being to allow the installation of a CV which lowers the angle thus removing vibration due to the lift. Other advantages of these yokes are the addition of working travel to a telescopic drive shaft and if the drive shaft fails, you can drive home with the front without spilling the transfer case or tranny fluid on the rear. 

The kits bring the yoke and a CV style drive shaft and will remove vibrations and restore longer u-joint life. No new housing, no new output shaft shaft.

NOTICE: MANY VEHICLES (CHEVY MAINLY) WITH A SLIP YOKE MAKE A CLUNK NOISE WHEN STOPPING AND YOU LET OFF THE BRAKE. ELIMINATE THAT FOR EVER WITH AN SYE FROM US. TAHOES, CHEVY P/Us, JUST ANYTHING WITH A SLIP YOKE. WE WILL MAKE YOU A YOKE TO BOLT TO THE TRANNY OR TRANSFER CASE SO THAT THE SLIDING IS ELIMINATED FROM THE YOKE. WE WILL MAKE  A DRIVE SHAFT TO GO WITH IT

IF YOU DON'T FIND IT HERE CALL US AND MAKE A ORDER FOR WHAT YOU DO HAVE. WE MAKE THEM ALL.

When do I need a CV?

When the angle of a single u-joint exceeds 7 degrees. Angles greater than this make the u-joint vibrate.

When do I need a high angle. Rules of thumb.

FRONT or REAR: Lifts between 4 inches higher or when the angle at the transfer case output exceeds 14 degrees or when the vehicle is built for lots of articulation where the CV may bind at full extension.

When do I need long travel. Rules of thumb.

When the extension (or travel) exceeds 2 inches or when you have build you vehicle for high articulation or high movement of the differentials like for rock crawling and other sports.

How do I measure extension? Measure the distance between the transfer case and the differential at ride height, and then lift the body and let the wheels droop and measure again. The difference is your static extension, add .5 inches more for dynamic conditions and that should be your extension.

What is standard spline versus long spline? Answer: 3.5 inches total  versus 7 inch total travel. We have up to 26 inches of travel if you need it but it costs $35 for each additional 4 inches, just tell us on the comments how much travel you want beyond the 7 we offer.

Ok, I want to order one, how do I measure?

 


Slip Yoke Eliminator (SYE) Wrangler Kit
for 231, 207, 242 transfer cases

   The simple way to make a kit at an affordable price is here.

   Look! Drive Shaft Superstore slip yoke eliminator does not require that the transfer case be removed and taken apart. This kit works just like the heavy duty except it uses the same output shaft and costs less than any other in the market. Click here to read more about it under the wrangler kits.

  • Our kit includes a spicer type CV style drive shaft.

  • Not just anyone can offer the high angle CVs that Drive Shaft Superstore can (even if they say they do).

  • Unless they buy form us, no one has the high speed 16 spline 1.5”diameter automotive long spline drive shaft that we make.
     

Wrangler SYE Kit -- $375.00

Wrangler SYE Kit with high angle CV -- $425.00

Wrangler SYE Kit and a drive shaft with high angle CV and long splines -- $500.00

_______________________________________________________________________

NP208 32SPLINE /NP241 32 SPLINE /BW1356 31 SPLINE SLIP YOKE ELIMINATOR KIT  SYE kits can be the same the only difference being the number of splines in the yoke.

ANY OF THESE DRIVE SHAFTS SHOWN HERE CAN BE USED WITH THE KIT. IT REMOVES THE CLUNK FOREVER

 

 

 

 

 

208/241  SYE Kit with drive shaft standard angle CV and standard  splines REMOVE THE CLUNK FOREVER 

-- 208/241  SYE 1310 HALF TON STANDARD SPLINE HIGH ANGLE  DRIVE SHAFT SYE  KIT  $400

-- 208/241  SYE 1350 ONE TON  STANDARD SPLINE HIGH ANGLE   DRIVE SHAFT SYE KIT $475

-- 208/241  SYE BAD BOY JR  2-TON STANDARD SPLINE HIGH ANGLE  DRIVE SHAFT  60 DEGREE FLEX  SYE KIT  -  $655

-- 208/241  SYE 1310 HALF TON LONG SPLINE / HIGH ANGLE DRIVE SHAFT SYE KIT  $475

-- 208/241  SYE 1350 ONE TON  LONG SPLINE / HIGH ANGLE DRIVE SHAFT SYE KIT $550

-- 208/241  SYE BAD BOY JR  2-TON LONG SPLINE / HIGH ANGLE DRIVE SHAFT  KIT 60 DEGREE FLEX $725

  

BW 1356 31 SPLINES FOR FORD  SYE Kit with standard angle CV and standard  splines. This actually fits any TC with 31 splines from Ford.

-- BW 1356  SYE 1310 HALF TON STANDARD SPLINE HIGH ANGLE  DRIVE SHAFT SYE  KIT  $400

-- BW 1356  SYE 1350 ONE TON  STANDARD SPLINE HIGH ANGLE   DRIVE SHAFT SYE KIT $475

-- BW 1356  SYE BAD BOY JR  2-TON STANDARD SPLINE HIGH ANGLE  DRIVE SHAFT  60 DEGREE FLEX  SYE KIT  -  $655

-- BW 1356  SYE 1310 HALF TON LONG SPLINE / HIGH ANGLE DRIVE SHAFT SYE KIT  $475

-- BW 1356  SYE 1350 ONE TON  LONG SPLINE / HIGH ANGLE DRIVE SHAFT SYE KIT $550

-- BW 1356  SYE BAD BOY JR  2-TON LONG SPLINE / HIGH ANGLE DRIVE SHAFT  KIT 60 DEGREE FLEX $725

 

 

ANY UJOINT OF OURS BREAKS IN TWO WE REPLACE IT FREE OF CHARGE