THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS
 

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

 

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.

                

 SYE  Kits                    LONG TRAVEL        ROVER, SUZUKI, TOY     BLAZERs + JEEPS+OTHERS    PERF 45     BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES

                         

Blazers 1350         1350 32 spline     Universal  32 SPL Suzuki          HD Buggy Axles 930 hubs         

CV 32 SPL 208TC  205,Atlas,All Kits   Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

 

 

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

 

 

SHOPPING CART SPECIALS

                                 A)  NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B)  Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft  Online.

                         D)  930 Buggy axles  Can not be beat !!!

 

 

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

 

 

 

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

  Ford-Chevy-Dodge-Jeep-Blazer SYEs  / Chevy S10 Front / S10 Stock rear / S10 231 SYE

 Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

 Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes Custom Flanges

 Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Catalogue

Customer Service

Contact Us

About Us

4x4 Links

4x4 Gallery

4x4 Videos

4x4 Babes

 

 

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS       

2417 WEST Lincoln St Phoenix AZ 85009

 

Suzuki Drive Shafts


FOR   LANDROVER CLICK HERE

FOR  TOYOTA DRIVE SHAFTS CLICK HERE

A new meaning to heavy duty SUZUKI DRIVE SHAFTS

   Experience drive shafts that will take you any where !!! These are the front and rear for a Sumo !!!

   Made of half ton u-joints and 250 wall tubing with heavy duty long splines that are so strong we warranty them for life time from breaking and twisting. And if that is not enough, you get flanges that allow thirty degrees and CV that flex to 40 degrees and that fit your flanges. We back our workmanship such that all welds are warranted for as long as you have the drive shaft.

   Bullet Proof 1310 U-joints / 30 degree flanges
   And they are bolt-on, no modifications 

rear with CVs


We are the inventor and the major supplier of Heavy Duty
 High Angle Long Spline Suzuki, Jep, Blazer and Tahoe Super Duty drive shafts


Information Needed on Order Form

  • The vehicle and transfer case you have.

  • The working length of the drive shaft to be built between the transfer case and the differential.

  •  Do you have a yoke or a flange?

  • See How to Measure A Drive Shaft if needed so you know how to record your measurement. Enter your front working length or your rear drive shaft working length as it applies.


Front Drive Shaft

Front drive shaft with high angle CV and standard splines    $275  
Front drive shaft with high angle CV and long splines 9"-- $375.00
Front drive shaft with no CV and long splines 9"-- $275.00
Front drive shaft with no CV, no long splines, just large u-joints and
flanges
-- $250.00


Rear Drive Shaft

Rear drive shaft with high angle CV and long spines  9"-- $295.00
Rear drive shaft with no CV and long spines 9"-- $275.00
Rear drive shaft with no CV, no long spines, just large u-joints and flanges -- $250.00
  Rear drive shaft with STD Spline High angle CV-- $275.00
 

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE