Two-Piece or one-Piece
Standard Spline or Long Spline
for Lots of Travel
Heavy Duty Solid Aluminum Carrier Bearing
or a Standard Carrier Bearing
A standard slip is added to the rear piece to extend
Or You can have just the rear Part with a slip
and you put it on
A super heavy duty carrier bearing that will not
allow lateral movement
or the bearing to mis-placed
A CV can be used for angle up to 80 degrees
depending on what CV is used.
This dr1ve shaft with long slip can be adapted to the rear part of the
two-piece drive shaft. Or make a single long piece.
rear one piece drive shaft
This drive shaft slip yoke
allows the differential to move and does not push carrier bearing
back and forth. Just specify the center to center of u-joints.
Two Piece with carrier bearing
complete --- $250
Call us with the length. Dealer call for
quantity pricing. The angle of the slip yoke ujoint is 30 degrees
and can be more.
CUSTOM SHAFTS WITH LONG
TRAVEL DOUBLE CARDAN CVs TO MAKE BIGGER ANGLES AND HAVE LOTS OF TRAVEL.