World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
World Class Driveshafts
SALES
and TECH HELP
800-845-6326 602-253-8006
Customer Service for order status and repairs 888-222-8610
602-253-8208
FAX
602-252-5638
ADDRESS
2417 WEST Lincoln St Phoenix AZ 85009
End Yokes for Transfer Cases and Differentials
ASK ABOUT OUT DEEP THROAT HIGH ANGLE 1350 CUSTOM CV STYLE OR U-BOLT YOKES
NEW IN THE MARKET 1350 ONE TON CV STYLE FORGED YOKE 32 SPLINES FOR 205,203, ATLAS, RUBICON, 231SHORT SHAFT KITS, AND OTHERS-
WE CAN PUT A ONE TON 1350 CV ON ANY TRANSFER CASE FRONT OR REAR.
1350 CV STYLE Yoke only Butt diameter 2.125 - $105
For Chevy Transfer 205
1350 CV STYLE Yoke 32 SPLINES Butt diameter 1.875 - $105
For Ford, Dodges, Atlas Transfer Cases, 231 Transfer Cases
_____________________________________________________________________________
1350 UJ DEEP THROAT COMPARISON
NEW !!! FORGED U-BOLT STYLE DEEP THROAT HIGH ANGLE 1350 U-JOINT For Ford, Dodges, Atlas Transfer Cases, 231 Transfer Cases 2 1/8 SEAL SURFACE 32 SPLINES
-- $105
32 SPLINES NP205 transfer case yoke
32 spline rear yoke CV style with seal and smaller bolt supports
1350 U-bolt STYLE
1310 CV STYLE
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1310 CV style NP205 32 spline transfer case yoke -- $65.00 1330 CV style NP205 32 spline transfer case yoke -- $85.00 1310 u-joint style NP205 32 spline transfer case yoke -- $65.00 1350 u-joint style NP205 32 spline transfer case yoke -- $105.00 1350 CV style NP205 32 spline transfer case yoke -- $105.00 DEEP THROAT HIGH ANGLE 1410 u-joint style NP205 32 spline transfer case yoke -- $120.00
**The price BELOW assumes that you will send your old yoke. If you don't have one or you don't want to, add $45 to the price below.
10 spline NP205 transfer case front yoke
Major diameter 1.25” 1 3/4 SEAL SURFACE
AVAILABLE
IF YOU NEED FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
The prices below assume you will send in you old 10 spline yoke good or bad in to us. If not Add $40 to the price. the reason is that the old yoke is not longer available or is very pricey. We are able to keep the price down in the manner..
1310 NP205 10 spline transfer case front yoke CV style -- $165.00 **
1310 u-joint style NP205 10 spline transfer case front yoke (obsolete but we have) -- 165.00 **
1350 u-joint style NP205 10 spline transfer case front yoke -- $165 DEEP THROAT HIGH ANGLE
1410 u-joint style NP205 10 spline transfer case front yoke -- 165.00
10 spline DANA 20 transfer case yoke
Major diameter is 1.125”
Dana 20 front/ rear 1410
Dana 20 10 spline yoke and flange
If YOU NEED FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
ALL CUSTOM MADE
The prices below assume you will send in you old 10 spline yoke good or bad in to us. If not Add $40 to the price. the reason is that the old yoke is not longer available or is very pricey. We are able to keep the price down in the manner..
1310 CV style Dana 20 transfer case 10 spline yoke -- $95.00 1350 Dana 20 transfer case (custom made) 10 spline yoke -- $165.00 DEEP THROAT HIGH ANGLE 1410 Dana 20 transfer case (custom made) 10 spline yoke -- $165.00 CUSTOM MADE ______________________________________________________________________________
10 spline Dana 44 Pinion Yoke
26 spline major diameter of 1.146 inches
1410
1310
IF YOU NEED FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1350 D44 CV STYLE PINION YOKE 10 spline$150 CUSTOM MADE 1310 CV style Dana 44 pinion yoke 10 spline -- $75.00 1310 U-JOINT STYLE Dana 44 pinion 10 spline yoke -- $65.00 1350 U-JOINT STYLE Dana 44 pinion 10 spline yoke -- $95.00 CUSTOM DEEP THROAT HIGH ANGLE 1410 U-JOINT STYLE Dana 44 pinion 10 spline yoke -- $95.00 CUSTOM
26 Spline DANA 300 Transfer case or Dana 44 Differenttial Yoke
1310 CV style1350 U-joint style
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1310 CV style yoke Dana 300 26 spline yoke-- $65.00 1310 u-joint style Dana 300 26 spline yoke -- $50.00 1350 u-joint style Dana 300 26 spline yoke -- $120.00 DEEP THROAT HIGH ANGLE 1410 u-joint style Dana 300 26 spline yoke (custom made) -- $105.00 _______________________________________________________________________________
1310 IF YOU NEED FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1310 Dana 30 pinion yoke -- $55.00 1350 Dana 30 pinion yoke -- $95.00 CUSTOM MADE DEEP THROAT HIGH ANGLE 1410 Dana 30 pinion yoke -- $110.00 CUSTOM MADE
26 spline 1.844 ground-hub distance
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1310 Dana 35 pinion yoke -- $65.00 1330 Dana 35 pinion yoke -- $80.00 1350 Dana 35 Custom pinion yoke -- $95.00 CUSTOM MADE DEEP THROAT HIGH ANGLE 1410 Dana 35 pinion yoke -- $110.00 CUSTOM MADE
29 Spline DANA 60/70 Pinion Yoke Yoke
major diameter is 1.276”FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
1410
U BOLT STYLES AVAILABLE.
1350 CV STYLE YOKE D60/70 PINION YOKE $150 CUSTOM DEEP THROAT HIGH ANGLE 1310 CV style YOKE D60/70 pinion yoke -- $150.00 CUSTOM MADE 1310 Dana 60/70 yoke u-joint style -- $70.00 1350 Dana 60/70 yoke u-joint style -- $150. U-BOLT SYLE CUSTOM DEEP THROAT HIGH ANGLE 1410 Dana 60/70 yoke u-joint style-- $95.00
30 spline Corporate 14 Bolt
30 spline yoke for 9.5 1350 1 TON and 10.5 1350 AND 1410 u-joint sizes,
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
The prices below assume you will send in you old 10 spline yoke good or bad in to us. If not Add $40 to the price. the reason is that the old yoke is not longer available or is very pricey. We are able to keep the price down in the manner..
1310 CV style Corporate 14 Yoke -- $165 CUSTOM MADE 1350 CV style Corporate 14 Yoke -- $165 CUSTOM MADE 1350 style Corporate 9.5 14 bolt SMALLER PINION -- $95.00 1350 Corporate 14 bolt 10.5 LARGE PINION -- $105.00 CUSTOM DEEP THROAT HIGH ANGLE 1410 Corporate 14 bolt 10.5 LARGE PINION -- $120.00
30 splines 208 FRONT YOKE
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGESThe prices below assume you will send in you old 10 spline yoke good or bad in to us. The reason is that the old yoke is not longer available or is very pricey. We are able to keep the price down in the manner..
1310 CV style NP205 30 spline transfer case yoke -- $150.00 CUSTOM MADE 1330 CV style NP205 30 spline transfer case yoke -- $150 CUSTOM MADE 1310 u-joint style NP205 30 Spline transfer case yoke -- $150.00 CUSTOM MADE 1350 u-joint style NP205 30 spline transfer case yoke -- $150.00 CUSTOM MADE 1350 CV style NP205 30 spline transfer case yoke -- $150.00 DEEP THROAT HIGH ANGLE CUSTOM MADE 1410 u-joint style NP205 30 spline transfer case yoke -- $150.00 CUSTOM MADE
30 splines Corporate 12 bolt 3/4 ton yoke
For 8.8 DIFF Major diameter is 1.29” Billet
1350 u-bolt style Corporate 12 bolt yoke -- $110.00 1410 u-bolt style Corporate 12 bolt yoke -- $150.00 CUSTOM MADE
30 spline Corporate 10 bolt 1/2-ton yoke
For 8.5, 3R inside clip UJ, major diameter 1.312”
3R CHEVY u-joint Corporate 10 bolt yoke -- $75.00 1350 Corporate 10 bolt yoke -- $90.00
28 splines 9 inch Ford
major diameter is 1.218"
FOR FLANGES WITH THIS SPLINE SEE CUSTOM FLANGES
The prices below assume you will send in you old 10 spline yoke good or bad in to us. The reason is that the old yoke is not longer available or is very pricey. We are able to keep the price down in the manner..
1310 9 inch Ford 28 spline -- $75.00 1350 9 inch Ford 28 spline -- $95.00 1410 9 inch Ford 28 spline -- $110.00 CUSTOM MADE
35 spline Ford 9 inch
major diameter is 1.515 Billet
1350 9-inch Ford 35 spline -- $175.00 BILLET
1350 8.8 Ford 30 spline -- $95.00
