Transmission and Transfer Case Slip Yokes

THE HOME OF THE TRULY HIGH ANGLE AND LONG TRAVEL DRIVE SHAFTS

When you order online or by phone, we guarantee that we will guide you if we see any problems with information you provided. You will get what you need.

Below you will find solutions to any problems you are having with drive shafts. We have manufactured a complete set of solutions so that there are very few if any problems you are having that we have not addressed.



SYE Kits                    LONG TRAVEL       ROVER, SUZUKI, TOY    BLAZERs + JEEPS+OTHERS    PERF 45    BBjr 60/Bad Boy80                                                 yokes            HI ANGLE LONG SPLINES



Blazers 1350         1350 32 spline     Universal 32 SPL Suzuki          HD Buggy Axles 930 hubs

CV 32 SPL 208TC 205,Atlas,All Kits Ford,Chvy,Dodg,Toy           Half ton/One ton long spline 35

TOP OF EACH WEB PAGE ARE THE SAME, SCROLL DOWN AFTER EACH PAGE FOR CONTENT

SHOPPING CART SPECIALS

                                A) NP231 SYE KIT start at $325 includes CV drive shaft.    Click & see

                         B) Heavy duty Short Shaft Kits With new shaft and housing etc... Click to see

                         C) 10% Off when you buy a stock drive shaft Online.

                         D) 930 Buggy axles Can not be beat !!!

CLICK BEST SELLER DRIVE SHAFT SHORTCUTS BELOW

You may cancel or delete selected items at any time before submitting a purchase

HOW TO MEASURE A DRIVE SHAFT

New Products / Wrangler Options / JK Jeep kit / CJ Drive Shafts / Chevy Rear Shaft / Chevy Frt

Chevy HD Drive Shafts /Toyota Frnt &Rear Shafts / Ford Super Duty/Dodge Drive Shafts

Ford-Chevy-Dodge-Jeep-Blazer SYEs / Chevy S10 Front / S10 Stock rear / S10 231 SYE

Bronco / Rubicon Shafts / Land Rover / Low Riders / Two CV Shafts / Long Travel / U-joints

Buggy Axles / SYE & Shaft / Tranny Yokes / Trans Case Yokes / Weld Yokes / Custom Flanges

Eliminate Slip Yoke/ Non-Serv Shafts / Hi Angle CV 40 deg Shafts / H Angle 50,60,80 CVs

Drive Shaft Parts /Stock Shafts / No CV Shafts / D300 CV Yokes / Dana20 CV Yokes / Long Spline

Link Trades : You verify our site and we check yours.

World Class Driveshafts
800-845-6326 602-253-8006 602-253-8208

ADDRESS

2417 WEST Lincoln St Phoenix AZ 85009

Transmission and Transfer Case
Slip Yokes

Jeep Slip Yokes

TJ/KJ YJ / KJ

1997 and up XJ and TJ slip yoke -- $45.00

1995 and below YJ and XJ slip yoke -- $45.00

32 spline Slip yokes for NP208, NP241 with CV. YOU CAN BOLT A CV TO THESE
Get Rid of vibrations due to the lift. These yokes bolt on to a CV or like the Saginaw, it is part of a CV (the one in the middle)

If the CV is not a high angle they still work on non-high angle CVs.

For high angle 40 degree 1310 CV 32 spline yoke -- $185.00

For Chevy Saginaw CV 32 spline yoke -- $90.00

For one ton 1350 CV 32 spline yoke -- $195.00

GM 32 spline Transmission Slip Yoke Use
for Blazers with NP208’s and NP241 transfer cases
and turbo 400 transmissions
Available in 1310 and 1350 u-joints, 3R Saginaw u-joints

1310 CV yoke 5 inches long GM 32 spline -- $65.00

1350 CV yoke 8 inches long GM 32 spline -- $95.00

Saginaw 3R GM inside clip u-joint, 8 in long -- $45.00

GM 700R4 Transmission Slip Yoke

1310 yoke GM 700R4 -- $75.00

Saginaw 3R GM inside clip u-joint -- $75.00

1350 yoke GM 700R4 -- $185.00

Ford Allison transmission slip yoke

ALLISON TRANS with transfer case large 1410 u-joint yoke specs of
(2.2” seal diameter., 1.575” output shaft diameter., 8.5” c-ujoint to tip)

One huge heavy duty yoke!

Ford Allison transmission slip yoke -- $125.00

Chrysler 700R4 Transmission Slip Yokes
New process Chrysler slip yoke used for the same applications of a 700 R4 yoke 27 spline 1.55 seal surface. Large Chrysler u-joint

Chrysler 700R4 Transmission Slip Yoke, large -- $95.00

Transmission Slip Yoke
For old style turbo 400 transmissions with a 1350 one-ton u-joint

Transmission Slip Yoke with a 1350 one-ton u-joint with straps-- $95.00

Transmission Slip Yokes
1410 new process yoke. Again, this yoke can be used in the same applications as a turbo 400 32 spline yoke above. However, the u-joint is a heavy duty ton and a half

1410 32 spline yoke -- $175.00

ANY UJOINT OF OURS BREAKS WE REPLACE IT FREE OF CHARGE